PL259 Coax Connector UHF Radio Plug - 4.9mm
Searching Address...
PL259 Coax Connector UHF Radio Plug - 4.9mm
This PL259 connector is typically soldered or crimped onto the end of your antenna's coaxial cable—the end that plugs directly into the back of your UHF radio. It’s a crucial component for ensuring a clean signal transfer from your antenna to your radio, and you'll need one whenever you're installing a new UHF antenna, replacing a damaged cable, or if you've had to cut and re-run your coax cable through the firewall or cabin.
Getting nothing but static from your UHF or noticing your comms are dropping out at critical moments? A dodgy, damaged, or poorly installed antenna plug is often the culprit, leaving you isolated when you need communication most.
PL2592 plug with 4.9 mm end
Product Features
- Reliable Signal: Engineered by GME for a perfect, low-loss connection, ensuring maximum signal clarity and range from your UHF setup.
- Built Tough: Constructed from quality metal components to withstand the constant vibrations and knocks of serious off-road driving.
- Precise Fitment: Specifically designed for a tight, secure fit on standard 4.9mm (RG58) coaxial antenna cable, the most common type used in 4x4 installations.
- DIY & Repair Ready: A straightforward component for anyone competent with a soldering iron or the correct crimping tool, allowing you to create custom-length cables or perform on-the-trail repairs.
Vehicle Fitment
This part has been designed to fit
- Universal application for any 4x4, truck, or plant equipment requiring a PL259 connector for 4.9mm (RG58) coaxial cable.
Please check vehicle fitment to confirm compatibility with your vehicle. Please contact us with your VIN details if you require further assistance to confirm fitment.
GME
GME is an Australian institution, trusted for decades by truckies, farmers, and 4WDers to provide tough, reliable radio communication gear that's built for the harshest local conditions.